Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 09:49

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

It also is a device that limits the change in current flow.

Are you happy that soon we will never hear from Kamala Jones again?

So, the voltage could go up to 500 volts, and the fuse will not open up.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

What bait should you use for ocean fishing?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

One

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Markets News, June 6, 2025: S&P 500 Hits 6,000 Points for First Time Since February as Stocks Surge After Jobs Report; Tesla Rebounds From Sell-Off - Investopedia

A fuse is a non-resetable over current circuit protector.

First Sentence:

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Is there a possibility that we are living in a simulation and that there is a concept of rebirth?

For this case there are devices called Metal oxide varistors (MOV).

Here is a simplified AC power diagram.

so, what happens?

WCWS Game 2: Texas Tech evens series with 4-3 win, setting up decisive Game 3 - Yahoo Sports

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This device then solves the entire problem.

In schematic diagrams this is the symbol for a fuse:

Why do narcissists keep calling on the phone after years of separation?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Winners & Losers From The 2025 NCAA Baseball Tournament Regional Round - Baseball America

Upvotes:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

He then describes Rainy Season and Lightning.

Why are Republicans so brainwashed and oblivious to the fact that a lot of the price increases going on right now is due to corporate greed, not inflation?

It seems Mohan does not understand the difference between a comment and an Answer.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Which album is your favorite that's now 50 years old (from 1975), and what's the best song on the album?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

But… the neutral is now “floating” because of the 1 ohm resistance.

Newark Airport to open its shuttered runway Monday, 13 days ahead of schedule - NBC News

but I think this circuit , shows a few more pieces.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

but this device (an Inductor) … impedes the rapid changes in the current.

Do women really cheat more than men?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

But it can get overloaded, and no longer works.

What does a fuse do?

Rihanna’s Father, Ronald Fenty, Dies at 70: Report - Billboard

Now when you have a certain ac resistance, then a current flows in a loop.

I post the exact comment here.

This one hit behind the barn.

The other is “what does a “fuse” do?”

[old diagram got deleted by accident]

a photo is worth a thousand words.

He then asserts :

A circuit breaker is similar, but is resettable.

These devices are installed between the “hot” and “neutral” and protective ground.

2024–10–14 [Omar Gharbi Omar Gharbi ]

At least they know the answer if they wanted it.

Because the load is inductive, the current lags the voltage.(by a bit).

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Barnstars:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

There are two important concepts here.

what exactly is a ‘surge’ protector?

These are simplified answers to the original question, and does not change anything I wrote above.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

The third is lightning and “how it gets conducted into a home.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There are three different concepts here that are getting confused.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

2024–10–16 [ OO OLAOYE OYEBODE ]

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then describes the function of a fuse.

eight

An AC voltage/ current source, and an ac inductive load.

What is lightning?

This is where this question deviates from being a 'generic' question, and becomes more specific.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[image of Common-mode choke]

This is where the MOV conducts again, and dissipated the energy.

nine

Edit 2024–10.

the problem then depends on "how fast does the fuse operate?".

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–10[John johnson John Johnson ]

The bolt then partially travels down the line to your home.

This is 'the assistant's answer'

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

(Dc diagram shown, AC is similar).

At one ohm, the resistor has a maximum of 1 watt power.